Archive for New Products

GTSPEC 3 Point Front Strut Tower Support Brace for 2012+ BRZ / FR-S / GT86 / FT-86

GTSPEC 3 Point Front Strut Tower Support Brace for 2012+ BRZ / FR-S / GT86 / FT-86

– CNC mounting Ends
– GTSPEC CNC cut logo

Buddy Club Press Release – New S2000 AP1/AP2 Extended Ball Joints!

 

BuddyClub_ExtendedBallJoints

As you track your vehicle and experience tremendous lateral G-forces while entering and exiting turns, your suspension geometry changes. As your car experiences sideways forces, the upper and lower control arms change angles in relation to one another. The resulting change could pivot the centerline of the affected wheel in such a way as to produce a significant change in camber, resulting in less tire contact with the ground and, subsequently, poor traction and stability.

To counteract this problem, Buddy Club has released the P1 Racing Extended Ball Joint, an adjustable ball joint that connects to the lower control arm, not the upper, thereby allowing a more correct and apt suspension geometry between upper and lower control arms to be maintained; this insures a more predictable roll center. The roll center adjuster is an essential part of any tuned suspension on a street or track vehicle lowered 2 inches or more. Not only will this particular kit help maintain proper roll center. It also contains our patent pending method to adjust camber. Now S2000 owners can quickly and effectively adjust camber at the track. Whether itʼs changing track conditions or a just dialing in your setup. The front kit has 4 levels of camber adjustment from zero to minus 5 degrees.

Buddy Club – New K-series Pulley Kit!

New K-series Pulley Kit!

Buddy Club has just released their new P1 Racing Crank Pulley Kit for the Honda K-series engines. Honda K-series engines love to rev, and you can free your engine to rev more quickly with the Buddy Club P1 Racing Pulley Kit. By reducing rotational mass and adjusting the pulley size ratio this kit offers improved acceleration, quicker throttle response and has been shown to free up an additional 8 HP and 7 ft-lb of torque in some race applications. The P1 Racing kit includes a Crank, Alternator, and Power steering/Idler pulleys. Each kit is paired with a high quality 7-rib replacement belt. Pulleys are available individually as well as in pulley sets. Installation can be done by a knowledgeable do it yourselfer, but as always, Buddy Club strongly recommends a professional installation.